|
|
General Industrial & Engineering Products
|
Suppliers Directory
|
DROPCO MULTILUB SYSTEMS
| | Address : |
0-89/1 Gandhi Nagar, Opp Railway Station NIT Faridabad, |
| Telephone : |
0129-0129-5415469, |
| Fax : |
129-5422469, |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
RADIAL IUBRICATORS - DROPCO MULTILUB SYSTEMS MEANT TOM DISCHARGE METERED AMOUNT OF OIL/GREASE FROM DIFFERENT PLUNGER PUMPS INCORPORATED IN A COMMON BODY. EACH PLUNGER PUMP DELIVERS OIL/GREASE AT A HIGH PRESSURE TO THE RESPECTIVE LUBRICATION POINT INDEPENDENTLY. MULTILINE LUBRICATORS CONSIST SINGLE PUMPING STATION HAVING NUMBER OF PUMPING ELEMENTS/ASSEMBLIES PLACED REDIALLY AND FITTED ONTO THE OUTER PERIPHERY OF THE HOUSING. THE PUMP ELEMENTS ARE ACTUATED BY A CAM ARE ROTATED BY SPEED REDUCTION DRIVES THE SYSTEMS HAVE CAPABILITY FOR CONTINUOUS RUNNING.
|
|
COMPACT LUBRICATION UNITS - COMPACT LUBRICATION UNITS DMCLU-2500, COMPACT INSTRUMENTS WITH METAL RESERVOIRS. THESE LUBRICATION UNITS INCORPORATE METERING INJECTORS, MANIFOLDS AND OTHER FITINGS AND TUBINGS, ETC. SUITABLE FOR INTERMITTENT SINGLE SHOT LUBRICATION. THE UNITS ARE DRIVEN BY ELECTRIC MOTORS AND ARE FITTED WITH STANDARD ACCESSORIES LIKE SUCTION STRAINERS, RELIEF VALVES, PRESSURE GAUGES, PRESSURE REDUCING VALVES, BLEED VALVES AND OIL FILLERS CUM BREATHERS. THE COMPACT LUBRICATION UNITS ARE MOST SUITABLE FOR PROVIDING LUBRICATION OF TEXTILE MACHINES, PRINTING, PACKAGING MACHINES AND MACHINE TOOL AUTOMATICALLY
|
|
METERING INJECTORS - THESE INJECTORS ARE MADE OF GOOD QUALITY ZINC MATERIAL AND DESIGN FOR SPECIALLY PRECISION MACHINE TOOLS.THIS SHOWS THAT THE INJECTOR IS CHARGED.OIL GOES TO LUBRICATION POINT WHEN PRESSURE DROPS DUE TO TAKE OFF PRESSURE AND THE SAME PHENOMENON TAKES P PLACE IN EACH CYCLE.MINIMUM WORKING PRESSURE IS 5KG/CM2 AND MAXIMUM IS 30KG/CM INLET PORTS SUITABLE FOR 6MM TUBE AND OUTLETS FOR 4MM TUBE CCAN BE FIXED DIRECTLY TO REQUIRED LUBRICATION POINTS IN MACHINES.THESE METERING INJECTORS ARE VERY EASY TO INSTALL.OIL REACHES EACH LUBICATION POINT VERY SAFELY AND EXACTLY AS THE WORKING OF THE INJECTORS CAN BE MONITORED BY INDICATING PINS AT EACH LUBRICATION POINT.
|
|
Take off Metering Injector - Developed by Dropco Multilub Systems the Take off Metering Injector which works very efficiently and precisely is made of good quality zinc material and design, especially for precision machine tools. Working of this injector can be seen from indicator pins that are provided on each outlet. When pressure comes to injector the indicator pins come out which shows the injector is charged. Oil goes to lubrication point when pressure drops, due to take off pressure and the same phenomenon takes place in each cycle. Two mounting holes of 5.5 mm dia are provided for fixing the injector. 1, 2, 3 and 4 numbers are given at each outlet and different doses can be provided at each outlet as per customer requirement. Minimum working pressure is 5 kg/cm² and maximum is 30 kg/cm². The inlet port is suitable for 6 mm OD tube (primary line) and outlets for 4 mm OD tube (secondary line), which can be fixed directly to required lubrication points in machine. Viscosity of oil is 20-500 cst recommended for the best performance of the injector.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
