|
|
General Industrial & Engineering Products
|
Suppliers Directory
|
VACUNAIR ENGINEERING CO PVT LTD
| | Address : |
NEAR GUJARAT BOTTLING RAKHIAL |
| Telephone : |
79-27477712747772 |
| Fax : |
79-2747770 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
FUEL BURNERS - LOW AIR PRESSURE OIL/GAS/DUAL FUEL BURNERS HAVING CAPACITY OF 10 LTR/HR TO 500 LTR/HR. THESE LOW AIR PRESSURE OIL/GAS/DUEL FUEL BURNERS ARE EXCELLENT FOR HIGH TEMPERATURE FURNACES FOR STEEL PLANTS, ROLLING MILLS, FERROUS FOUNDRIES, ROTARY FURNACES, GLASS AND SILICATE INDUSTRY, CERAMIC AND REFRACTORY FURNACES AND MANY MORE APPLICATIONS. THEY ARE AVAILABLE WITH SEVERAL ADDED INSTRUMENTS FOR AUTOMATIC OPERATIONS.
|
|
VACUUM PUMPS/COMPRESSORS - THE PUMPS ARE AVAILABLE IN WIDE SELECTION FOR ANY REQUIREMENT RANGING FROM 20 TO 7000 M3/HR, VACUUM UP TO 700 MM HG AND PRESSURE UP TO 3.5 KG/CM2. THE AIR EJECTOR ARE AVAILABLE IN CAPACITIES RANGING FROM 50 TO 2000 M3/HR AND VACUUM UP TO 25 MM HG ABSOLUTE. THE PUMPS AND COMPRESSORS CAN HANDLE AIR/GAS/AIR WITH WATER COMFORTABLY. STANDARD PUMPS ARE AVAILABLE WITH STUFFING BOX TYPE GLAND SEAL ARRANGEMENT. VACUUM PUMPS ARE AVAILABLE IN CIFG-260 GUN METAL, PHOSPHOR BRONZE, ALUMINIUM BRONZE, SS-304 SS-316 AND OTHER ALLOY STEEL MATERIAL AS PER REQUIREMENTS.
|
|
Liquid Ring Vacuum Pumps/ Compressor - The latest enticement from Vacunair Engineering Co is a
Liquid Ring Vacuum Pumps/ Compressor. Some of the key features of the featured products are that there is only one rotating part - a balanced rotor running with close clearances without any metallic contact with other parts; no lubrication is needed and air or gas handled is oil free; the pump can manage hot and saturated vapours. Vapours are condensed by cool seal water; air is compressed by rotating water ring radically and outlet ports are also radial. The pump can comfortably handle dust, fibre and foreign matter with seal water;It can handle more seal water and hence for many of the application receivers are not needed the pump has cylindrical control plates having ample area for inlet/outlet port fitted with close clearances to the rotor. Axial clearances are not to be maintained and so it is very easy while in maintenance. The pump maintenance is even less then an electric motor; pressurised gland system assures leakages of atmospheric air into the pump; unloaded valves are catered to get out any foreign solid particles like any process fibres/pulp, which will increase life of the pump and decrease over all maintenance; and low power and water consumption, etc. Material of construction: all graded cast iron with EN-8 steel shaft; rotor and control plates in bronze with stainless steel shaft; all stainless steel construction; alloy-20; cast alloys; and cast steel.
|
|
Centrifugal Air Blowers - Presented by Vacunair Engineering Company the Centrifugal Air Blowers are a new concept in fan engineering. Selection from 9 type, range 14 to 40 and each type having specific speed for best efficiency. These can handle air, hot flow gases, corrosive gases, dust, fibre, powder material, etc. Unique bearing pedestal design for longer bearing life/easy alignment. Impellers are dynamically balanced. These blowers are offered in single/multi stage designs. Construction is in MS/SS 304/SS 316/MS with rubber or FRP lining. Available in capacities up to 3,00,000 m3/hr and pressure up to 2500 mm WG.
|
|
CENTRIFUGAL AIR BLOWERS & FANS - HIGH-EFFICIENCY CENTRIFUGAL AIR BLOWER AND FANS CATERED VACUNAIR ENGINEERING CO PVT LTD, HAVE NEW CONCEPT IN FAN ENGINEERING SELECTION FROM 9 TYPE RANGES FROM 14 TO 40 AND EACH TYPE HAVE NUMBER OF SIZES FOR PARTICULAR REQUIREMENT AND DIFFERENT SPECIFIC SPEED FOR BEST COMPETENCY. IT IS CONCEIVABLE TO DESIGN THE FANS AT SYNCHRONISE SPEED FOR DIRECT DRIVE ARRANGEMENT WITH BEST EFFICIECY. THESE AIR BLOWERS AND FANS CAN HANDLE AIR, HOT-FLOW GASES, CORROSIVE GASES, POWDER, DUST, FIBRE MATERIAL, ETC .THEY ARE OFFERED FOR IMPELLERS MOUNTED ON MOTOR SHAFTS, DIRECT COUPLED AND V-BELT DRIVES. IMPELLERS HAVE BACKWARD, BACK INCLINED, FORWARD CURVES TYPE DESIGN WITH CONSTRUCTION WELDED, REVETTED SELECTED BASE ON NEEDED APPLICATION. THE IMPELLERS ARE DULY DYNAMICALLY BALANCED AS PER ISO:1940-1973 (E) CLASS G 6.3.THE BLOWERS AND FANS ARE DESIGNED IN SINGLE STAGE, MULTI-STAGE AND DWDI TYPE DEPENDING ON THE NEEDED SPECIFICATIONS. THEY ARE ALSO OFFERED WITH CAPACITY RANGING FROM 100 M3/ HR TO 300000 M3/HR WITH PRESSURES UP TO 2500 MM WG.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
