|
|
General Industrial & Engineering Products
|
Suppliers Directory
|
GURU BROS
| | Products : |
Roller Bed Welding Systems |
| Address : |
D-3 INDL ESTATE GUINDY |
| Telephone : |
44-2323516 |
| Fax : |
44-2342012 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
CIRCULAR WELDING SYSTEMS - (ROTOWELDDV1DL) THESE ARE FULLY PROGRAMME-CONTROLLED MACHINES WITH 2 WELDING TORCHES SIMULTANEOSULY WELDING THE INNER AND OUTER OF THE STAY PLATE TO LPG CYLINDER. THE USER-FRIENDLY, PROGRAMMABLE KEYPAD AND BACKLIT LCD DISPLAY FACILITATES EASY PROGRAMMING AND CAN STORE 25 PROGRAMS THESE MACHINES CAN SET UP TO WELD OF THE BUNG AND ALSO THE FOOT RING
|
|
DURAL TORCH WELDING SYSTEMS - AUTOMATIC DUAL TORCH WELDING SYSTEMS (V-1), PRESENTED BY GURU BROS, ARE SPECIALLY DESIGNED TO WELD VP RING STAY PLATE ASSEMBLY OF LPG CYLINDERS TO CYLINDER SHELLS. THESE WELDING SYSTEMS ARE CICULAR AND FULLY-PROGRAMMABLE FEATURING BACKLIT LCD DISPLAY AND USER-FRIENDLY KEYPAD. BOTH THE INSIDE AND OUTSIDE WELDING CAN BE DONE AT TEH SAME TIME. WELDING TRAVEL SPEEDS ARE FULLY-PROGRAMMABLE. NON-WELDING AREAS ARE SKIPPED AT HIGH SPEED. THE INNER PORTION OF THE STAY PLATE ASSEMBLY IS WELDED USING SPECIAL LOCATOR-CUM ROTATING ASSEMBLY, WHICH ADMITS THE INNER TORCH ALONG WITH A NON-CONTACT SENSOR. BOTH THE TORCH AND THE SENSOR ARE PROPELLED HORIZONTALLY TO THE WELDING POSITION, WHILE THE OUTER TORCH IS AUTONOMOUSLY ARTICULATED. TYPICAL CYCLE TM ERS ARE AROUND 30 TO 40 SECONDS FOR BOTH, INNER AND OUTER WELDING AT THREE PLACES, DEPENDING ON THE TYPE OF WELD BEAD SOUGHT. ALL PARAMETERS OF THE WELD SEQUENCE ARE FULLY-PROGRAMMABLE. ONE SET OF THE WELDING CAN BE PERFORMED ON A FULLY-AUTOMATIC MODE AND CAN RESULT IN LESS REJECTION/REWORK. SETTING UP IS MADE SIMPLE AND IS DONE IN ABOUT 20 TO 30 MINUTES TIME.
|
|
LEAKAGE CLAMP METERS - TRANSERA SYSTEMS PVT LTD PRESENTS LEAKAGE CLAMP METERS (MODEL HT77), MADE HT ITALIA, ITALY. THESE CLAMP METERS ARE DESIGNED USING SPECIAL NUCLEUS TO MEASURE LEAKAGE CURRENTS. THEY CAN BE USED TO MEASURE FAULT CURRENTS IN MEDICAL ROOMS AND FOR QUICK ANALYSIS OF ANOMALIES WHICH CAUSE RCDS TRIPPING. THE LEAKAGE CLAMP METERS ARE DESIGNED AND BUILT FOR CURRENT MEASUREMENTS UNDER CAT IV 600V AND VOLTAGE MEASUREMENTS UNDER CAT III 600V. THEY ARE PERFECT TO DETECT FAULTS IN CIVIL AND INDUSTRIAL PLANTS WHERE SUDDEN TRIPPING OF RCDS OCCUR. THESE CLAMP METERS CAN ALSO BE USED WHENEVER LOW CURRENTS IN THE ORDER OF UA ARE TO BE MEASURED. FUNCTIONS INCLUDE: TRUE RMS MEATUREMENTS, AC CURRENT, FREQUENCY, AC/DC VOLTAGE, RESISTANCE, CONTINUITY, AUTO POWER OFF, PEAK HOLD, ETC. STANDARD ACCESSORIES INCLUDE CARRYING CASE, TEST LEADS, 9 V BATTERY AND INSTRUCTION MANUAL.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
